Designing Custom Golf Balls with Your Logo
Putting a logo on a golf ball looks simple. In practice, the difference between a sharp, professional custom golf ball and a fuzzy off-color disappointment comes down to three early decisions: which ball model can support your design, what file format your logo arrives in, and which print method handles your color count. Get those right and the rest is straightforward.
Custom golf balls with your logo are branded golf balls produced via inkjet printing on the ball's surface, available across 5 premium models from Titleist, Bridgestone, and Srixon. At Makers Garments, we've designed custom golf balls for 3,300+ organizations, including the Atlanta Community Food Bank fundraiser tournament, Driscoll's company event at a golf resort, plus broader gift programs at Netflix, Microsoft, Spotify, Amazon, and Chick-fil-A. This guide covers the print method, the file requirements, color count limits per ball model, and the free 24-hour mockup process.
Key Takeaways
- Print method: Inkjet (UV-cured) for full color on most ball models.
- Color limits by ball: Up to full color on Bridgestone TreoSoft, Tour B RX, Titleist TruFeel, Srixon Z-STAR XV. Titleist Pro V1 capped at 2 colors.
- File format: Vector preferred (AI, SVG, EPS). PDF or PNG (300 DPI) accepted.
- Free design service: 3D mockup in 24 hours, unlimited revisions, no design fees, no setup fees, no hidden fees of any kind.
- Minimum order: 6 dozen for 12-packs (72 balls), 24 dozen for 3-pack sleeves (72 balls).
- Lead time: 10 to 15 business days standard from design approval.
The two print methods for custom golf balls
Inkjet printing (UV-cured)
Inkjet printing is the method Makers Garments uses for most custom golf ball orders. The process sprays specialty UV-curable ink directly onto the ball surface, then instantly cures the ink under UV light. The result is a vibrant, high-resolution print with sharp edges and full color reproduction. Inkjet handles gradients, photo-realistic artwork, and complex multi-color logos cleanly.
The technology is fast (each ball prints in seconds), durable (the ink bonds to the cover material), and forgiving of design complexity. It's the right method for almost every custom golf ball design that needs more than 2 colors.
Pad printing
Pad printing is the older industry standard. The process transfers ink from an etched plate onto a soft silicone pad, which then presses the design onto the curved ball surface. Pad printing handles simple logos and clean wordmarks reliably and produces a print that has held up across generations of golf ball decoration.
For most custom golf ball orders at Makers Garments, inkjet is the default because it supports a wider design range. Pad printing remains in use for specific brand and ball combinations where the surface coating chemistry favors it.
Color count limits by ball model
| Ball model | Max colors | Best design profile |
|---|---|---|
| Custom Bridgestone TreoSoft | Full color | Multi-color logos, photo-realistic designs, full brand palette |
| Custom Bridgestone Tour B RX | Full color | Multi-color brand designs at premium tier |
| Custom Titleist TruFeel | Full color | Multi-color brand designs at soft-feel tier |
| Custom Srixon Z-STAR XV | Full color | Multi-color brand designs at distance-plus-spin tier |
| Custom Titleist Pro V1 | 2 colors max | Bold single or two-color brand marks. Simplify logos with many colors before submission. |
The Titleist Pro V1 limit isn't a Makers Garments choice; it's a function of the premium urethane cover and surface coating that protects the ball's tour-level performance. The constraint is shared across every supplier of custom Pro V1 in the industry.
Where the logo goes on the ball
The standard placement for a custom golf ball logo is on the side of the ball opposite the brand name (Titleist, Bridgestone, or Srixon). This puts the logo at the visible address position when the ball is set up to play: the player sees the brand name when teeing the ball, then sees your logo from over the top of the shot.
Two configurations are common:
- Single side print. One logo on one hemisphere. Standard, clean, and the most common choice. Visible at address.
- Double side print. Logo on both hemispheres. Doubles visibility, useful for tournament marshaling or sponsor activations where the logo needs to be unmissable.
For most custom golf balls programs, single side print is the right call. Double side adds modest cost and is reserved for cases where logo visibility is a primary objective rather than a secondary one.
File format requirements
The single most common cause of design delays is a logo file that has to be rebuilt before the mockup can be produced. A few minutes of file prep saves a day or two on production.
Vector formats (preferred)
Vector files use scalable mathematical curves rather than fixed pixels. They reproduce cleanly at ball-surface scale (typically the design lives within a 1 to 1.5 inch square area on the ball). Accepted vector formats: AI (Adobe Illustrator), SVG, EPS. If your logo was created by an agency or in-house designer, a vector file exists somewhere. Ask whoever owns your brand assets for the source file.
Raster formats (acceptable)
High-resolution PDF or PNG at 300 DPI or higher works for most logos. The design team can recreate simple wordmarks and basic icons from a clean raster file, though there may be a 1 to 2 day delay for vector conversion.
Avoid low-resolution JPGs pulled from a website, social media exports, or screenshots. These produce blurry, pixelated results at ball scale.
Color specification
Pantone (PMS), CMYK, or HEX color codes all work. The production team interprets these to the closest available production ink. For brand-critical color accuracy on multi-color designs, supply Pantone codes alongside the file.
The Makers Garments design process
- Upload your logo through the Bundle Builder or contact form. No design fees, no setup fees, no hidden fees of any kind.
- Receive your free 3D mockup within 24 hours. The mockup shows your logo on the actual ball model you selected, with placement, color, scale, and print method confirmed. No charge, no obligation.
- Request revisions. Unlimited revisions until the design is right. Adjust scale, placement, color, or method as needed.
- Approve and order. Approve the mockup, choose quantity (minimum 6 dozen for 12-packs), confirm pricing from the published tier table.
- Production runs 10 to 15 business days from design approval. Ships to one address, multiple offices, a tournament venue, or directly to individual recipients.
Common logo design mistakes (and how to avoid them)
Logo too small or too detailed for ball scale
A logo designed for a business card sometimes shrinks too far when reproduced on a golf ball surface. Hairline strokes disappear, small typography becomes unreadable. The fix: simplify the logo for ball-scale reproduction. The mockup phase catches this.
Choosing Pro V1 for a 5-color logo
The Titleist Pro V1's 2-color cap surprises many first-time custom golf ball buyers. If your logo has 5+ colors and you want a tour-level ball, two options: simplify the logo to a 2-color version, or switch to Bridgestone Tour B RX or Srixon Z-STAR XV (both accept full color and sit in similar performance tiers).
Forgetting to outline fonts
If your vector file has live text and the production team doesn't have the exact font, type rendering breaks. In Illustrator, convert all type to outlines (Type, Create Outlines) before sending the file.
Submitting a screenshot
The most common mistake: a screenshot of the logo pulled from the company website. Result is 72 DPI thumbnail that cannot be cleanly reproduced. Fix: get the source vector file from your brand assets owner.
Custom golf balls pricing across the 5 models
Pricing depends on which ball model your design fits. Quick reference:
- Bridgestone TreoSoft: $31.49/dozen at 6 dozen, drops to $25.37 at 150 dozen. Best value tier.
- Titleist TruFeel: $48.99/dozen at 6 dozen, drops to $39.37 at 150 dozen. Soft feel tier.
- Srixon Z-STAR XV: $67.37/dozen at 6 dozen, drops to $54.68 at 150 dozen. Distance plus tour spin.
- Bridgestone Tour B RX: $79.62/dozen at 6 dozen, drops to $64.74 at 150 dozen. Mid-premium tour.
- Titleist Pro V1: $92.74/dozen at 6 dozen, drops to $75.24 at 150 dozen. Tour benchmark.
Related guides
- Custom Golf Balls: The Complete Guide, the pillar guide
- Srixon vs Bridgestone vs Titleist Custom Golf Balls, brand comparison detail
- How Much Do Custom Golf Balls Cost?, full pricing guide
- Custom Golf Balls for Tournaments, event logistics
- Custom Golf Balls for Client Gifts, premium client appreciation
- Custom Golf Balls for Employee Gifts, employee programs
Frequently asked questions
How do I put my company logo on a golf ball?
Upload your logo file (vector preferred: AI, SVG, or EPS) through the Bundle Builder or contact form. The design team returns a free 3D mockup within 24 hours showing your logo on the ball model you selected, with placement, color, and size confirmed. Unlimited revisions, no design fees, no setup fees.
What file format does my logo need for custom golf balls?
Vector files in AI, SVG, or EPS format are strongly preferred for clean reproduction at ball-surface scale. High-resolution PDF or PNG at 300 DPI or higher are also acceptable. Low-resolution JPEGs from websites may need simplification before printing; the design team flags any file quality issues during the free mockup phase.
What's the difference between pad printing and inkjet printing on golf balls?
Pad printing transfers ink from an etched plate via silicone pad onto the ball surface. It's the long-standing industry standard. Inkjet printing (also called UV printing) sprays UV-cured ink directly onto the ball, supports full color and photo-realistic designs, and is the method Makers Garments uses for most custom golf ball orders. Higher-end balls like Titleist Pro V1 are limited to 2 colors due to surface coating chemistry.
Can my golf ball logo be printed in full color?
Yes, on most ball models. Bridgestone TreoSoft, Bridgestone Tour B RX, Titleist TruFeel, and Srixon Z-STAR XV all accept full-color inkjet printing. The premium Titleist Pro V1 caps at 2 colors because of its softer urethane cover and surface coating. The 3D mockup confirms what works for your specific design and chosen ball before production.
How many sides of the golf ball can be printed?
Single-side print (one logo on one hemisphere) is standard and the most common configuration. Double-side print (logo on both hemispheres of the ball) is available on most ball models for additional visibility on the tee. The free mockup process specifies single vs double side at design time.
Where on the ball does the logo typically go?
The standard placement is on the side of the ball opposite the brand name (Titleist, Bridgestone, Srixon). This puts your logo at the address position when the ball is set up to play, maximizing visibility when the player tees off. The design team confirms placement in the 3D mockup.
Ready to design your custom golf balls?
The fastest way to see your custom golf balls with your logo is to upload the file and let the design team return a free 3D mockup within 24 hours. No setup fees, unlimited revisions, no obligation to order.
Upload your logo and see a free mockup → | Talk to our design team
